The Bard Wall-Mount One Ton Air Conditioner is a self contained energy
efficient heating and cooling system, which is designed to offer maximum
indoor comfort at a minimal cost without using valuable indoor floor
space or outside ground space. The One Ton is the ideal product for
versatile applications such as: new construction, modular offices, school
modernization, telecommunication structures, portable structures or
correctional facilities. Factory or field installed accessories are available to
meet specific job requirements.
Engineered Features:
Aluminum Finned Copper Coils
Rifled tubing and enhanced louvered fin
for maximum heat transfer and energy
efficiency.
Quiet Twin Blowers:
Designed to accept full ducted system or
for non-ducted free blow installations.
High Efficiency Rotary Compressor
R-410A Refrigerant:
Designed with R-410A (HFC) non-ozone
depleting refrigerant in compliance with
the Montreal protocol and 2010 EPA
requirements.
Liquid Line Filter Drier:
Standard on all units. Protects system
against moisture.
Galvanized 20 Gauge Zinc Coated
Steel Cabinet:
Cleaned, rinsed, sealed and dried before
the polyurethane primer is applied. The
cabinet is handsomely finished with a
baked on textured enamel, which allows
it to withstand 1000 hours of salt spray
tests per ASTM B117-03.
Electrical Components:
Are easily accessible for routine
inspection and maintenance through a
right side, service panel opening.
Circuit Breaker:
Standard on 230/208 Models.
One Inch, Disposable Air Filter:
Easily removed for replacement from
the outside.
Optional two-inch pleated
filter, factory or field installed.
Top Rain Flashing:
Standard feature on all models.
Slope Top:
Standard feature for water run-off.
Compressor Control Module:
Standard on all units. Built-in off-
delay timer adjustable from 30 seconds
to 5-minutes. 2-minute on-delay if
power interrupt. 120-second bypass
for low pressure control, and both soft
and manual lockouts for high and low
pressure controls.
Alarm output for
alarm relay.
High & Low Pressure Switches are
Auto-Reset:
Standard on all units. Built-in lockout
circuit resets from the room thermostat.
Provides commercial quality protection
to the compressor.
Barometric Fresh Air Damper:
Allows up to 100 CFM of fresh air.
Full Length Mounting Flanges:
Built into cabinet for improved
appearance and easy installation.
Optional Product Features:
Fully Modulating Economizer:
Can be factory or field installed.
Commercial Room Ventilator:
Can be factory or field installed.
Alarm Relay: Dry contacts for remote alarm on high or low pressure lockouts.
Low Ambient Cooling: Permits cooling down to 0°F Ambient Outdoor temps. Field or factory installed option.
[