T2700 - Commercial Platinum Slimline Thermostat 2 Heat/2 Cool
Current Replacement For: Carrier 33CS400-01
As
of Jan 2022, the new model is T4700 and the pin locations are now
different than the original, so the new baseplate will need to be
installed so that the wiring and pins match up correctly. It is no
longer possible to just pull the front of the thermostat off and replace
it while leaving the baseplate wired to the wall. Only compatible with 2-wire remote sensors, NOT the 3-wire RS+5/RS1/RSGND versions.
Commercial Non-Programmable 2-Heat, 2-Cool Thermostat is the
introductory Commercial Platinum series model that is equipped with
Setpoint Security Limits and on-board Dry Contacts for time-clock
enabled systems. The T2700 is also compatible with a wide array of
valuable accessories, including wired and wireless Remote Sensors and
the Humidity Module for Humidification and Dehumidification control (see
below). For use with most Air Conditioning & Heating Systems
including: 1 or 2 Stage Electric Cooling & 2 Stage Gas Heating, Heat
Pump, Electric or Hydronic Heat.
Suggested Accessories- ACC0422 wall plate to cover extra large wall openings
- ACC0620
Security Lock Ring takes only 5-seconds to install and provides three
different levels of security from limited adjustment to complete lockout
- ACC0432
EZ Programmer let’s you copy the programming for one thermostat and
upload it to other thermostats in seconds. Great for jobsites with
multiple thermostats!
- ACC0401 Remote Sensor with Override Button
let’s you lock the thermostat in a secure location while using the
sensor for control in the space. Override button provides up to four
hours of Occupied 1 setpoints
- ACC0414RF and ACC0414REC Wireless Remote Sensor and Receiver make installation of a remote sensor a snap!
- ACC0430 Humidity Module upgrades the T2700 thermostat with Dehumidification and Humidification functions
- TB400
Security Camera Remote Sensor looks like a real security camera, but is
really just a remote temperature sensor. Great for retail stores!
- ACC0402 Duct Sensor can be mounted in the supply or return air ducts
- TIB515
Trane Interface Board allows the use of Venstar thermostats with most
Trane Voyager equipment manufactured between 1991 and mid-2003
- ACC0410 Add-A-Wire let’s you control two pieces of equipment with one wire; great for installations requiring extra wires!
[