Hi-Velocity 3.5-5.0 Ton Refrigerant Base Module For use with Hi-Velocity Inverter Heat Pump ESP-60 or HVS-60 or any Inverter Heat Pump that uses an EEV
Filter rack not included, must be purchased separately. Use 400212000100 filter rack.
• Return Air Bases are acoustically lined and require field assembly.
• Filter Rack & Filter must be purchased separately.Can be installed vertically or horizontally
Heat Pump ready - No TXV Installed
module is for use with HVS-60 Inverter Heat Pump
Condensing Unit, or other inverter heat pumps that use an EEV for
metering. It does not come with thermal expansion valve, as there are
internal EXVs inside the Heat Pump.
When installing the RBM-I Modules, DO NOT INSTALL WITH TXVs.
The module will come with access port(s) that will need to be installed to read refrigerant pressures/temperatures at the
Evaporator (RBM-I). Fig. 01 shows approximate installation locations for these components.
RBM-I Modules were designed to be used with the HVS-24, HVS-36 and HVS-60 Heat Pumps but can be used on any R-410A
condensing unit, as long as a TXV is installed as well. All Energy Saving Products cooling modules come standard with R-410A