Showing 1–16 of 27 results
LCDI POWER CORD PROTECTION The power cord for the 208/230 volt unit provides LCDI protection by automatically disconnecting power during an unsafe condition. Power can be restored by pressing the RESET button. Power cord model determines the electric heat capacity of the PTAC. 15 Amps = 2kW 20 Amps = 3kW 30 Amps = 5kW
LCDI POWER CORD PROTECTION The power cord for the 208/230 volt unit provides LCDI protection by automatically disconnecting power during an unsafe condition. Power can be restored by pressing the RESET button. Power cord model determines the electric heat capacity of the PTAC. 15 Amps = 2kW 20 Amps = 3kW 30 Amps = 5kW
LCDI POWER CORD PROTECTION The power cord for the 208/230 volt unit provides LCDI protection by automatically disconnecting power during an unsafe condition. Power can be restored by pressing the RESET button. Power cord model determines the electric heat capacity of the PTAC. 15 Amps = 2kW 20 Amps = 3kW 30 Amps = 5kW
16″ high x 42″ wide 230 Volts PTAC 7,000 BTUs – cooling – electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 7,000 BTUs – heat pump (cooling and heating) – back-up electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 9,000 BTUs – cooling – electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 9,000 BTUs – heat pump (cooling and heating) – back-up electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 12,000 BTUs – cooling – electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 12,000 BTUs – heat pump (cooling and heating) – back-up electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 15,000 BTUs – cooling – electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
16″ high x 42″ wide 230 Volts PTAC 15,000 BTUs – heat pump (cooling and heating) – back-up electric heat – universal heater (pick power cord to match heat capacity needed) – chassis only (for complete new installation, the chassis, power cord, wall sleeve and outdoor grille are needed) Specs/Performance Literature
Gree Replacement air filters for Gree ETACs (1-pieces) new part number is GREE11121212 1 piece per item
e9000 remote Control for the e-tac series only.
Condensate drain kit can be used to control condensate water from the packaged terminal unit. the kits can be used for exterior or interior drain systems. the drain kit includes both a short right angle tube and a 6” long straight drain tube to suit any application.
Leveling legs attach easily to the wall sleeve and offer accurate leveling and support for units without a subbase. leveling legs are adjustable from 3–1/4 to 5–1/2 inches (80 to 140 mm).
The non-electrical subbase is made of heavy gauge steel to provide support for the wall sleeve. the subbase is designed to mount directly to the wall sleeve and contains adjustable legs from 3-1/4 in. to 5-1/2 in. (80 to 140 mm) for leveling, side filler panels and mounting holes for an electrical modules. it will…
No products in the cart.
