Free Cooling Option
The Chiltrix CX30 adds a "free cooling" option to CX34.
Yes, it looks like the chiller, but it sits next to the actual chiller and this houses the water coils, fan and electronics to divert the water loop through this module when its cold enough outside to harness free cooling from the outside. This allows you to get free or very reduced cooling costs depending on the outdoor temperature.
Server rooms need cooling all year, even when it is cold
outside. If you operate in a northern area with cold winters, this
option is for you.
When outdoor temperatures drop below 38°F, the CX34 glycol-water
loop is automatically extended through a special water-to-air heat
exchanger to harvest outdoor cold ambient conditions to pre-cool the
glycol-water loop so that the CX34 variable speed compressor can drop to
a very slow speed and consume less power. This can save about 50% off
of it's already low power consumption without lowering capacity.
At and below 28°F, the CX34 chiller with Free Cooling SE add-on
will turn off the compressor entirely and still be able to maintain its
rated cooling capacity using only the variable speed pump and fan
motors. At this point, the CX34 achieves a COP of of >41 and EER of
Enjoy the savings of 2 tons of cooling for less than 75 watts.
The colder it gets, the less water flow rate is needed, allowing the
VSD pump power draw to drop under 20 watts.
Depending on location, for some customers free cooling mode can be active up to 3 months per year during the daytime and up to 5 months per year at night.