Mitsubishi PAR31MAAJ – Wired Remote Control

Description

Our PAR31 wired seven day controller with backlit LCD screen allows you
to program up to eight separate start/stop patterns per day over a week.
Features:

• Backlit LCD Screen.This attractive full dot liquid crystal display incorporates a large backlit screen and simple menus for easy operation.
• Weekly Timer. You
  can set up to 8 temperature and airflow patterns per day for seven
  days, allowing you to reduce your energy consumption when needed, saving
  you both time and money. Perfect for the busy home and office or retail
  store.
• Energy Efficient Control. Our PAR31 controller
  allows you to precisely control power consumption. Levels can be
  adjusted from 0 -90% of maximum capacity and up to four patters can be
  set per day. Our auto-return function automatically resets the
  temperature to the original setting.
• Temperature Range Restriction.
  This function allows you to limit the maximum and minimum temperature
  settings preventing overheating or overcooling. In house testing has
  established that using a temperature within 1°C results in a 10%
  reduction in power. This controller also comes with an operation lock.
• Energy saving functions.
  Night Setback* – To prevent indoor dew or excessive temperature rise,
  this control starts heating operation when the control object group is
  stopped and the room temperature drops below the preset lower limit
  temperature. Also, this control starts cooling operation when the
  control object group is stopped and the room temperature rises above the
  preset upper limit temperature.
• Auto Return – This
  function helps to maintain the indoor temperature at the required level.
  Even if the temperature setting is changed during operation, the set
  temperature automatically returns to the originally preset temperature
  after certain amount of time. It is possible to set the required
  temperature for limited time (30-120 min. in 10-minute increments)

*Temperature
range and night setback mode availability depends on heat pump model.
Please confirm mode availability where this feature is critical to
design.

Room air temperature sensing. Sensing in the return air
of an indoor unit is not always ideal, especially when fresh air is
being introduced. All of the Mitsubishi Electric wired wall controllers
now have the ability to sense the room ambient via the inbuilt
thermostat. This means you are sensing the actual space temperature
where the end user is. If the wall controller is not located in an
appropriate location for sensing the space condition, a PAC-SE41 remote
sensor could also be installed.