Hello Guest Login!

Featured Products

W36HB-A05 Bard 3.0 Ton Wall Mount Heat Pump | 11eer | 230/1 | 5kW Aux Heat

Your Price: $4,821.07
In Stock.
Part Number:W36HB-A05
The Bard Wall-Mount Heat Pump is a self contained energy efficient heating and cooling system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. These units are the ideal products for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures or correctional facilities. Factory or field installed accessories are available to meet specific job requirements.

Engineered Features:

Aluminum Finned Copper Coils Rifled tubing and enhanced louvered fin for maximum heat transfer and energy efficiency.

Quiet Twin Blowers: Designed to accept full ducted system or for non-ducted free blow installations.

Heat Pump Compressor: Scroll Compressors eliminate need or crankcase heater. Standard on all models.


Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements.

Liquid Line Filter Drier: Standard on all units. Protects system against moisture.

Galvanized 20 Gauge Zinc Coated Steel Cabinet: Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03.

Electric Heat Strips: Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed.

 

Filter Service Door: Separate service door provides easy access for filter change.

 

One Inch, Disposable Air Filters: Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed.

 

Condenser Fan and Motor Shroud Assembly: Slides out for easy access.

 

Barometric Fresh Air Damper: Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available.

 

Built-in Circuit Breakers: Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment.



Top Rain Flashing: Standard feature on all models.

Slope Top: Standard feature for water run-off.

Compressor Control Module: Standard on all units. Built-in off- delay timer adjustable from 30 seconds to 5-minutes. 2-minute on-delay if power interrupt. 120-second bypass for low pressure control, and both soft and manual lockouts for high and low pressure controls.

Alarm output for alarm relay.

High & Low Pressure Switches are Auto-Reset: Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.

Barometric Fresh Air Damper: Allows up to 100 CFM of fresh air.

Full Length Mounting Flanges: Built into cabinet for improved appearance and easy installation.

Optional Product Features:

Fully Modulating Economizer: Can be factory or field installed.

Commercial Room Ventilator: Can be factory or field installed.

Alarm Relay: Dry contacts for remote alarm on high or low pressure lockouts.

Low Ambient Cooling: Permits cooling down to 0°F Ambient Outdoor temps.  Field or factory installed option.

Related Items

Recently Viewed Items