NEW WCSP-G series is a vertical water
coil air handler, which can be used with a chiller or boiler plant
to provide heating or cooling, or both. 6-Row Copper/Aluminum
Fin Coil, Sweat Connections, 24 Volt Transformer, Insulated Cabinet,
Float Switch, Integrated Control Board, Condensate Trap, Anti-Vibration
Foam Strips, Mold Resistant Primary Drain Pan. The internal, or
electric duct heater and an additional 2 row hot water coil can
also be added as a second stage if required. This unit is also
convertible to vertical discharge, but must still lay horizontal.
7/8 water in and out. Vertical ESP4860V requires 2 supply air discharge adapters. MEA approval: MEA-119-85-E.
NOTE: The vertical 4860 units have 2 air discharges on the top. You will need 2 supply air adapters.
- Six-row copper/aluminum coil
- Sweat-type connections
- 24V transformer
- Fan relay
- Insulated cabinet
- Float switch
- Field convertible to vertical discharge
- Condensate trap
- Anti-vibration foam strips
- Stainless steel primary drain pan
Model #: WCSP-4860V; Nom. Tons: 4 / 5; CFM @ 1.5"
W.C: 1,150; F/L Amps: 3.6; Motor HP: 1; Water Conn. Inlet: 7/8"; Water
Conn. Outlet: 3/8"; Width: 43"; Height: 33"; Depth: 16-1/8"; Wt. Lbs.: